Kayak Brush Gripper Assembly #KA6361Updated a month ago

How to Assemble Kayak Brush Gripper #KA6361

1. Thread the paracord line through the guides on the interior of the Anchor from the bottom to the top of one side. Give yourself about a foot of slack pulling through the top of the Anchor.

2. Pull the paracord through the guides on the opposite side through the bottom. Give yourself about a foot of slack.

3. Tie an overhand bend knot roughly six inches from the bottom of the Grip Anchor to secure the excess paracord. Start by creating an overhand loop using both ends of the paracord.

4. Pull both tag ends fully through the overhand loop created in the previous step.

5. Pull the knot tight, leaving at least two inches of tail on the short tag end to keep the knot from slipping.

6. Secure Grip Anchor simply by squeezing the clamp to open the jaws and attaching to brush, limbs or shoreline debris. The harder you pull the paracord, the stronger the Grip Anchor will hold. Secure end of paracord to kayak, canoe, or motorboat to complete Grip Anchor Assembly.